It might be irritating to try to repair a broken travel trailer door. Whether you’ve got an older trailer or one that has just started to break down, there’s some good news you can fix it! Luckily, if your travel trailer door is broken, you don’t need to replace the whole thing. It only requires you to know how to adjust the travel trailer door.
If your trailer door is not closing correctly, you will have to find out why before doing anything else. This is because installing a new door inadequately could fail to work correctly.
Your priority is to ensure that the problem doesn’t lie with the trailer itself. So check for damage as well. Here are some helpful hints for restoring a trailer door to its original condition.
How To Adjust Travel Trailer Door
If you have issues with your travel trailer door, you might need to adjust it. This can be done by the below-mentioned step that you can perform independently. Or else, you can also call a company specializing in making trailers to perform this task.
Diagnose the problem
When you are troubleshooting a travel trailer door, it is essential, to begin with, the door’s parts. Inspect everything of your trailer door to figure out the exact problem.
At first, you can check on the handle. A handle that is not working correctly will prevent the door from closing or opening. So you’ll want to make sure to keep it in good condition.
Then, there is the door latch, which can also be damaged and need to be checked. You can also check if the door rubber has gone loose or the lock mechanisms are not working.
The repairing procedure
After you are done diagnosing the issues with the trailer door, it’s time to get into action. You will have to take different repair measurements for different kinds of doors. Here is a quick walkthrough of the procedure guideline,
A Loosed Door
Resurrect your old travel trailer door with this easy step-by-step guide! These instructions are easier to follow for anyone,
- Remove the skin and latches.
- Measure the size and shape of the door and cut an aluminum panel to fit it.
- Make latches with the same hole size.
- Apply adhesive to the entire surface of the metal panel with a spray gun.
- Finally, secure it to the door by leaving a 1/8-inch gap on all sides.
- In this step, you need a helping hand.
A Saggy Door
When your front door sticks and won’t close, it can cause a hassle. So, before calling in the professionals, you can try some simple repairs.
- Tighten the screws on the door hinges.
- If your door’s hinge screws are loose, take a few of your screw hole plugs and partially fill in the holes. This will give more room for the screws to fit appropriately.
- Replace the center screw of all the hinges with longer screws. It will strengthen the bond between the door and the hinge.
- Make sure your door is clean. Dirt, grime, and oil can cause it to stick. Scrubbed and clean is the only way to ensure a smooth fit.
Trailer Door Latch
Try this simple DIY tip if your trailer’s door latch has been giving you trouble. First, ensure the latches are securely mounted to the frame, and sliding surfaces are free from dirt or debris.
Then lightly touch up any rusty bolts with a bit of WD-40. Then give them a few turns. Next, take a rag and place it over the door handle. Open and close the latch multiple times for the final touch.
The Replacement Procedure
If any repairing processes don’t last, you can consider replacing your trailer door. You can also check for compartments that require replacement rather than the entire door. Here are some helpful hints to get you started on your search for a new front door:
- Take measurements of your present door’s width and height.
- Think about the look you want to achieve.
- Set a budget before starting your search and keeping to it.
- Look for deals on shipping to save some cash.
- Ask friends, family, and neighbors for recommendations.
Consult a professional door mechanic before replacement. That’s because they might suggest some alternative solutions to help extend the trailer life.
Frequently Asked Questions
Here you will find answers to the most frequently asked questions regarding your travel trailer door repair.
How do I adjust my RV cabinet doors?
Most RVs come equipped with utility spaces in cabinets to store your necessities. If your RV cabinet doors do not stay closed, you can easily adjust them to eliminate the gap. You must eradicate the door from the hinge to make the changes.
How do you adjust hinges on a camper door?
To adjust the hinges, you should figure out if your door is hung on one hinge or two. If it’s turned on one hinge, you’ll have to get a screwdriver and remove the hinge pin. This can quickly be done by removing the hinge pin and sliding the door to a more even level with the camper.
Conclusion
Nothing lasts forever — not even an RV door. If you’re a seasoned traveler, you may have some experience with problems that can occur when you’re on the road. One common mistake is not checking that travel trailer door before traveling.
Every RV door has a few common problems. In particular, the frame may shift or become bent. Simple adjustments can solve these problems, but it’s best to fix them before going on the road.
You’ll want to double-check that the doors close correctly and that the pieces that hold them in place are in good working order.
So, call a professional manufacturer for help. They can advise you on how to stop this problem and take care of it in the future. However, if you go to the store from which you purchased the door, they’ll set you up with a new one at an affordable price.