You might wonder whether Ford model cars perform better with their tow/haul mode feature. To be honest, it just doesn’t work better but best for heavy load transmission operation. However, the concept of When to use tow-haul mode f150 is still not clear for many consumers.
The tow-mode on the F150 model works as a roar. Its towing capacity is unbelievable in terms of climbing mountain roads, changing driving modes, or hauling heavier equipment. With all the safety measurements included, you can be at ease even when changing the gear ratios.
The advanced Ford F150 model is appreciated primarily for this tow-haul mode. Industrialists have designed it to be beneficial for hauling activities and giving the rider full control of the car. No wonder it can make your entire drive modes controlling experience smoother than expected.
When to Use Tow-Haul Mode F150
Tow-haul isn’t necessarily any vital driving mode that everybody requires. You can use it as mandated and keep it inactive as you wish.
So, exactly when should you use tow/haul mode? Here are some circumstances we believe are crucial for using the tow drive mode options.
- Climbing mountain roads
- Towing heavy loads on a flat ground
- Adjusting transmission shift patterns
- Controlling over excessive car speed
- Cruising roads with the heaviest loads
- Driving in Sport mode
- Controlling steering column
On heavy trucks, tow/haul is unquestionably an excellent function. Its principal function is to adjust the transmission pattern during a mile trip seamlessly. You can, however, have more control over the steering wheel, gear ratios, and braking in your car.
How to Use the Tow Mode
Most Ford’s have a Tow/Haul feature, which allows the driver to activate and deactivate towing capabilities. You can use your F-150 like a big rig if you want to tow a fifth-wheel trailer.
Just press the Tow/Haul button on the gearshift lever, and the truck will lower the exhaust, shift the transmission into tow mode, and raise the rear end to a higher gear.
When driving in “Eco-Boost Engine Mode,” your car becomes fuel-efficient. That delays the upshifts automatically. This also reduces the frequency of transmission shifts and provides a smoother braking capacity. Your automobile may also downshift, which is less taxing on the engine.
Downshifting changes one gear ratio to a lower gear ratio. It is performed on a multi-speed transmission when the vehicle speed reduces and the engine RPM (Revolutions per Minute) increases. This assists in slowing the vehicle and may improve engine braking efficiency.
What Does Tow-Haul Mode Do on Ford F-150
Tow haul mode does a lot to your beloved Ford F-150 Trucks! It is integrated with an effective engine brake, cruise control, and transmission. So, you are sure to get an outstanding engine response from the beast.
You can relax driving at the regular speed while on tow mode. Because It won’t exhaust brake or keep on downhill engine braking.
Although, this mode cannot help you much regarding fuel economy. For saving on gas mileage, you must ride it on normal mode. You should also be careful while driving on icy roads as it may cause accidents.
And be sure not to equip any non-tow/haul mode truck with external tow drive modes. It adds excess pressure to the truck, resulting in unexpected bad events.
For a broken haul button We would like to recommend some good quality haul button for your Tow Haul Mode F150 that are available in the market
The maximum weight that a Ford vehicle can tow is determined by its towing capacity. So if you want to move your boat to a new location, you’ll need a truck that can handle the extra load.
When looking at trucks, it’s essential to consider how well they will tow/haul your boat while maintaining a high-efficiency level on the road.
Frequently Asked Questions
Many consumers don’t understand the difference between tow mode and non-tow mode. In this section, we have tried answering the most asked questions regarding tow/haul mode.
Should you always use tow-haul mode?
You always want to tow in tow-haul mode. But if you’re driving with a light load, you can use tow-convoy mode rather than the full tow/haul mode.
If you’re towing a heavy trailer, you can steer and brake more precisely by keeping your foot off the right pedal. However, it’s best to use tow-haul mode when you need extra pulling power or braking force — like on an icy downhill.
At what weight should I use tow-haul mode?
When your truck is loaded up to 90%, you have to switch to tow/haul mode, which changes the transmission shift points. If your car is just a bit overweight, say 75%, then you won’t need to worry about this. Tow/haul mode also gets pretty annoying when you’re driving around without much of a load.
Does tow-haul mode use more gas?
When towing or hauling, getting up that steep and long hill may seem like a challenging task. But by selecting the Tow/Haul functions, the transmission will downshift and produce more RPMs.
As a result, it will aid efforts in powering up the incline. This shifts automatically out of tow/haul mode once the hill is conquered.
Last Words
The tow-haul mode of a Ford truck may be unnecessary for some drivers, but it’s necessary for those who are towing. The tow-haul mode allows you to relax while driving.
Because it will enable you to drive more manageably and easily. It does this by reducing the throttle response — making your truck harder to speed up but easier to slow down. Which means you can drive straight with minimal steering and effort.
In addition, the setting makes your vehicle more immune to road debris and potholes. In case you have a lot of heavy cargo, or you’re on a hectic schedule, this feature is convenient.
Like any good truck, Ford F150 has a tow rating. But unlike most other trucks, it can live up to that tow rating! The F-150 model will increase its haul mode and ensure the best service when you need to work with heavy loads.